Yitu's Paper Cutting Machine

Computer engraving machines are often used in the advertising industry. As the name suggests, a computer engraving machine is a device that sends corresponding instructions to the cutting machine through a computer.
Do you know how to use a cutting correctly? Next, let me show you the correct usage of computer engraving machines.







Using Way Introduction :

1： Connect cutting plotter to a power socket with the cord.

2： After successfully connecting the cutting plotter to the power supply, select a communication cable to connect cutting machine with the computer.

3： After all device successfully connection, turn on the socket power.

4： Insert the cutting head or special drawing pen into their holders in machine.


5： After the cutting head or drawing pen is successfully placed, place the cutting material into the cutting machine, cuttng material includes reflective film, wall stickers, self-adhesive adhesive, paper, kraft paper, etc.

6： Set the parameters of the engraving machine accordingly. You need to set your own coordinate origin, cutting head speed, and pressure intensity accordingly. In the beginning, try to draw at a low speed.

7： After setting some relevant parameters of the machine, try to handle cutting operation. Press the offline button of the machine first,in the meaning while press the acceleration and deceleration buttons of the cutting machine. Then the machine will auto attempt working, and it will perform a self check to cut the pattern.

8： Transfer data using a computer. After the transmission ends, start cutting and drawing. After waiting for a while, it willcomplete cutting operation.

The operating steps of a computer engraving machine! Easy to understand!
As a terminal device, computer engraving machines are required for many processes in daily life. The application of computer engraving machines has beautified our lives, and the application of computer engraving machines is also a manifestation of a sense of technology. Computer engraving machines are playing an increasingly important role in production and daily life. So how to use a computer engraving machine? Now let's listen to the editor's sharing!







Using Way Introduction :

1: Connect cutting plotter to a power socket with the cord.


2: After successfully connecting the cutting plotter to the power supply, select a USB cable to connect cutting machine with the computer.


3: After all device successfully connection, turn on the socket power.


4: Insert the cutting head or special drawing pen into their holders in machine.


5: After the cutting head or drawing pen is successfully placed, place the cutting material into the cutting machine, cutting material includes reflective film, wall stickers, self-adhesive adhesive, paper, Craft paper, etc.


6: Set the parameters of the engraving machine accordingly. You need to set your own coordinate origin, cutting head speed, and pressure intensity accordingly. In the beginning, try to draw at a low speed.


7: After setting some relevant parameters of the machine, try to handle cutting operation. Press the offline button of the machine first,in the meaning while press the acceleration and deceleration buttons of the cutting machine. Then the machine will auto attempt working, and it will perform a self check to cut the pattern.


8: Transfer data using a computer. After the transmission ends, start cutting and drawing. After waiting for a while, it will complete cutting operation.
In summary,the usage method of the cutting plotter machine may be difficult for our fresh operators. Our fresh operators can follow the steps above step by step. In addition.

we should pay attention to the maintenance and upkeep of the cutting machine in daily life, which is more conducive to extending the service life of the machine.

As we know, the reflective film engraving machine is one of many types of cutting plotters, which mainly adopts advanced design and precision manufacturing mechanical structure. High speed cutting also has efficient quality, with smoother curves, sharper corners, and small fonts that do not change. Comparing with ordinary cutting plotters, it is significantly more efficient .







1. Turn on the power and check if the equipment is in normal condition, it is important to ensure that the equipment is functioning properly before proceeding with work. Non operators should not use their hands to disassemble the reflective film cutting machine to avoid injury.

2. Cutting,Place the reflective film into the paper inlet of the reflective film cutting machine, determines the accuracy position, fix it, and press the relevant button. Usually, when using a reflective film engraving machine for the first time, test is conducted, and after the test results are good, large-scale engraving can begin. You can select the corresponding project through the menu. If there are any issues, press the pause button to temporarily stop. After confirming that there are no errors, press the “OK” button to start the operation.

3. Put away the printed drawings and turn off the power.

4. After completing the operation using the reflective film cutting machine, the staff should turn off the equipment and check the usage status of each device. Only after confirming that there are no problems can the work be completed. This will make it more convenient to use the cutting machine for the next time. It is important to pay attention to these issues when using the engraving machine.

5. Clean the reflective film cutting and engraving machine to ensure it is clean for coming use.

The content introduced above is the usage method of the reflective film engraving machine. When operating and using the reflective film engraving machine, it must be the responsibility of professional personnel. It is not allowed for others to operate and use the equipment casually to avoid malfunction problems caused by improper operation methods. In addition, if it is the first time using a reflective film engraving machine, it is recommended that users first use the reflective film for engraving testing. First, print a sheet according to the specifications to see the effect, and ensure that there are no problems before putting it into use. This can avoid errors during large-scale engraving work and also save more raw materials and costs.

Also known as beer machines, cutting machines, and CNC punching machines. It is mainly used for die cutting, indentation and stamping operations, lamination, automatic waste discharge of certain non-metallic materials, self-adhesive adhesive, EVA, double-sided tape, electronic products, mobile phone pads, etc. (fully or partially broken). The die cutting machine uses steel knives, metal molds, steel wire (or steel plate engraving templates), and applies a certain pressure through steel plates to cut printed matter or cardboard into a certain shape.

It is an important equipment for post press packaging processing. The die-cutting process is a commonly used process in packaging printed materials. It is a die cutting board formed by combining die cutting knives according to the design requirements of the product. The forming process of rolling printed matter or other circular blanks into the desired shape or cut under pressure. The indentation process utilizes a crimping knife or crimping mold to apply pressure on the sheet material to create indentation marks, or to bend and form the sheet material at a predetermined position using a roller.




Generally, die cutting and indentation treatment is the process of combining the die cutter and crimping cutter in the same template, and performing die cutting and indentation treatment simultaneously on the die cutter, which is very simple. It is called die cutting. The main process of process die-cutting indentation is: loading the plate → adjusting the pressure → determining the rules → pasting auxiliary materials of the substrate → testing die-cutting → formal die-cutting indentation → peeling → finished product winding or cutting into pieces → packaging.