Hot Selling Sticker Cutting Machine

Computer engraving machines are often used in the advertising industry. As the name suggests, a computer engraving machine is a device that sends corresponding instructions to the cutting machine through a computer.
Do you know how to use a cutting correctly? Next, let me show you the correct usage of computer engraving machines.







Using Way Introduction :

1： Connect cutting plotter to a power socket with the cord.

2： After successfully connecting the cutting plotter to the power supply, select a communication cable to connect cutting machine with the computer.

3： After all device successfully connection, turn on the socket power.

4： Insert the cutting head or special drawing pen into their holders in machine.


5： After the cutting head or drawing pen is successfully placed, place the cutting material into the cutting machine, cuttng material includes reflective film, wall stickers, self-adhesive adhesive, paper, kraft paper, etc.

6： Set the parameters of the engraving machine accordingly. You need to set your own coordinate origin, cutting head speed, and pressure intensity accordingly. In the beginning, try to draw at a low speed.

7： After setting some relevant parameters of the machine, try to handle cutting operation. Press the offline button of the machine first,in the meaning while press the acceleration and deceleration buttons of the cutting machine. Then the machine will auto attempt working, and it will perform a self check to cut the pattern.

8： Transfer data using a computer. After the transmission ends, start cutting and drawing. After waiting for a while, it willcomplete cutting operation.

It is rarely seen in daily life, although it may seem easy to operate, users often overlook some details, which affects the effectiveness of use. Today, let's analyze in detail how to use the engraving machine correctly.







1、 How to use a engraving machine correctly
1. Firstly, use a power cable to connect the engraving machine to the power socket.



2. After successfully connecting the computer engraving machine to the power supply, randomly select a communication cable to connect the engraving machine to the computer.



3. After successfully connecting all devices, turn on the power of the socket.



4. After the power supply of the seat is turned on, insert the engraving knife or dedicated drawing pen of the engraving machine into the engraving holder of the engraving machine.



5. After the engraving knife or drawing pen is successfully placed, special media is placed into the engraving machine, including reflective film, wall stickers, stickers, paper, and kraft paper.



6. After setting the medium of the engraving machine for the power amplifier, the parameters of the engraving machine should be set accordingly. You need to set your own coordinate origin, engraving knife speed, and pressure intensity accordingly. When starting to use it, try to draw at low speed.



7. After setting some relevant parameters for the engraving machine, start the trial engraving operation. Firstly, press the offline button of the computer engraving machine, and then press the acceleration and deceleration buttons of the computer engraving machine at the same time. This way, the computer engraving machine will automatically perform a trial engraving operation, and it will perform self inspection and engraving graphics.



8. Use a computer to transmit data. After completing the transmission, start engraving and drawing operations. After waiting for a period of time, the engraving and drawing operations of the computer engraving machine can be completed.